Progr. Process Instrument Model

PM 9000

Highlights

• DIN rail mounting
• Especially qualified for installation in flat wall case and terminal box
• At standard a lot of measuring ranges for different sensors
• Varied connections at digital IO's from PLC (also Mini-PLC)
• 10 parameter sets for a quickly
  configuration
• Measuring during parameter setup
• Application as a nominal value
  transmitter

• Analog Input Ranges
  • (16 bit, 5 measurements per sec, user configurable)

  • Measuring Ranges user scal-and tarable:

  • Voltage:	±20.00 V, ±2.000 V ±200.0 mV, ±20.00 mV
    Current:	+/-20.00 mA, 0/4 to 20.00 mA
    Angle potentiometer:	0 to 100.0 %
    Resistance:	0 to 1,000 kOhm
    DMS:	1,5/2/2,5/3/3,3 mV/V +/-100.0 % (4-wire)

  • Fixed Measuring Ranges:

  • Pt100:	-200.0 to + 800.0 °C (2-, 4-wire)
    FeCuNi (J):	-100 to +800 ° C
    NiCrNi (K):	-100 to +1300 ° C
    PtRhPt (S):	0 to 1750 °C
    Temperature compensation:	internal, constant or without

• Digital Input Ranges
  • -input voltage 24 - 60 V, isolated

  • Counter (24 Bit, to scale):

  • Display range:	+99999 to -9999
    Incremental:	1-, 2-, 4- fold to 2 kHz
    Impulse:	max. 2 kHz, alternatively gate, direction, reset

  • Time Measuring

  • Frequency:	0.01 Hz to 10 kHz
    Time:	to 9999.9 s
    Cycle:	to 9999.9 s
    Pulse duration:	to 9999.9 s
    Impulse/min	0 to 99999
    Impulse/h	0 to 99999

• Special Function
  • Nominal value transmitter
• Alarm Outputs
  • 2 alarms with solid-state relays
    (24 VDC, 200 mA, short-proof) supplying about the main power supply
  • Programmable functions:
    alarm point, hysteresis, switching characteristics, rise time - and fall time delay
    data source: direct input -, mean -, peak -, valley value
  • Direct connection to PLC
• Analog Output
  • Free scaling, isolated, 14 Bit
  • Voltage: 0 to 10 V, max. 10 mA
  • Current: 0/4 to 20 mA, 500 Ohm burden
  • Data source: Direct input-, mean-, peak-, valley value
  • Error indication at current output
  • Sensor break: > 22 mA
  • Error: < 2 mA

• Synchron Serial Interface
  • Isolated
  • Connection of seperate displays with serial input
  • Connection to PLC resp. IO-cards
  • Measured value transmitting
  • Control of transfer rate via PLC
  • Minimum IO-expense at the PLC
• Software Functions
  • User scaling
  • Adjustable digital filter of 1th order
  • Peak and valley detection
  • Userdefined linearization up to 10 points
  • Taring
  • Automatic reset of peak and valley detection
  • Display of temperature in °C, °F or K
  • Setting of parameters during measurement
• Power Supply
  • 18-36 VDC, polarity reversal protection